Category Archives: Projects

3D Android Avatar Tutorial Part 2


This is the concluding part of this tutorial. Will we finish up the head and create the rest of the body parts for the avatar.

What You’ll Be Making:

Steps:

9. A. Let us focus our attention to the shading portion. From the looks of the preview we can see the shadow seems to be in the back though the Dot on the sphere indicates it’s on the front. This is due to the face of the cube being moved and is now facing the back.

B. All that is needed to be clicked is the first button on the left under the sphere. Now the light is in the back though we see it in front in the preview which is explained earlier.

C. Now move the light somewhere near the bottom left. Now click the “New __” button (middle button) to create a new light. The light will automatically be placed in the front. Move the light near the middle but a little to the right. Set the ambiance to 50 and the light intensity to 50 for the front light.

10. A. Create a green rectangle that has a longer length. Create a small circle and place it tangent to the rectangle’s right and bottom side.

B. Delete only the portion in the bottom-right corner and combine everything else together.

C. Revolve the object and insert values as shown in the picture.

D. Move the torso near the head.

E. Scale either the head of the body to match the width of the other.


11. A. Create a setup as pictured below with two circles (on at the top, one at the bottom) with a rectangle that goes connects half of one circle to the half of the other.

B. Use the Pathfinder or ShapeBuilder to delete half of the object as pictured below.

C. Revolve the object but do make the use of the easy shortcut Effect>Apply Revolve. This Apply _____ shortcut only shows up after you use any particular effect such as revolve or dropshadow.

D. Now we have a capsule shape that will be used for both the arms and legs.


12. A. Now copy the capsule object and place four of them around the torso as shown below.

B. Select three capsules starting from the right and right-click and choose Arrange>Send to Back.

C. Now it should look like as pictured below.

13. A. Draw a circle and a long rectangle whose sides (left and right) are tangent to the circle. Make sure the rectangle only intersects half of the circle. Also draw a line segment through the middle.

B. Combine the right half portion only and delete the left portion. This is due to Illustrator’s revolve feature revolving about the left side but this can be changed through the Revolve options but since the default is set to revolve around the left edge, let us leave it be.

C. Then as always, revolve the object.

14. A. Place the “ear” piece on top of the “head” and scale it down as pictured below.

B. Make sure the object is selected and go to its appearance window. Click the 3D Revolve link to make some changes. Make sure the preview box is checked. Drag the cube around till the “antenna” is facing toward us a little bit but also leaning to the left. See the picture below for help. Then click OK.

C. Copy the object again. Go to its appearance and click the 3D Revolve link. Drag the cube around so that this piece leans to the right and facing away from us slightly. Then click OK.

15. A. Your finished piece should look similar to what is pictured below.

I hope you’ve enjoyed this tutorial and learned something new.

Advertisements

3D Android Avatar Tutorial Part 1


Today I will show how to create a 3D Android avatar using only tools from Illustrator. Keep in mind that the steps won’t be basic and should only be done with sufficient experience with Illustrator. This will also be a long tutorial so I will break it in two parts.

What You’ll Be Making:



Tools:

  • Illustrator
  • 3D Revolve
  • Pathfinder/ShapeBuilder
  • Symbols

Steps:

1. A. Create a circle by using the ellipse tool and holding to constrain the proportions to a circle.

B. Make the circle green (RGB 158, 197, 76 or #9EC54C) and draw some segments (vertical and horizontal) that cross its center. I chose a black stroke for the segments so I could see them.

C. Select the circle and segments and click Shift+M to bring up the ShapeBuilder tool. Hold option or alt to turn the cursor into a Minus shape which indicates that you will remove objects instead of combining them. Simple click and drag your mouse across the pieces you want to remove then release your finger from the right mouse button.

D. Now you a single, green quadrant-shape.

2. A. Draw small squares from the corners of this quadrant. Draw lines that pass through the edges of the squares as pictured below. Also draw a circle with a center starting as the same one as the quadrant but let its intersecting arc be slightly lesser than the quadrant. Make sure the circle is also tangent to the squares’ “bottom” sides. Look to pictures below for help.

B. Delete some unnecessary pieces as pictured below.

C. Make sure to zoom in on your object and delete parts that go past your perfect arc as seen below. Remember to hold option or alt when using ShapeBuilder to remove objects.

D. Not add objects that you need together since we want a single combined shape.

E. You should get a shape like below.

3. A. Make sure the object is selected then go to Effect>3D>Revolve.

B. Make sure to check the preview box. Click More Options if you haven’t already. Set the shading to either plastic or diffuse shading. I personally will use Diffuse Shading. Make sure to change the blend steps to 100 but you can set it to the max (256) if you want. Then click OK.

4. A.  Now let us move aside from the previous object and work on symbols to use for future Art mapping of the 3D object. Create a rectangle of the same color with a ratio of 3:12. The ratio is important!

B. Create small black circles near the edges from the sides of the rectangle. Make sure the circles are the same distance apart from the edges of the rectangle.

C. Cut out the circles from the rectangle using either the Pathfinder of ShapeBuilder.

D. It should look as the one below.

E. Open your symbol window if you haven’t already. If unopened, go to Window>Symbols. Select your object then click the button right next to the trashcan button. Name the symbol anything. The type of symbol doesn’t matter as stated on the window. Name it anything then click OK.

5. A. Make sure the symbol is selected inside the Symbol window, if it’s not just simply click it. Then click the “New” button (the one next to the trashcan icon). Name it _____ 2.

B. Double-click your copied symbol to enter inside it to edit its features.

C. Flip your object horizontally. Then double-click anywhere on the canvas except on the object to exit the isolation mode.

D. Create a square of the same color and then make it a symbol. Name it anything.

E. Now you should have one square symbol and two rectangle-with-holes symbols.

6. A. Go back to your 3D object and go to its appearance  window and simple click the 3D Revolve effect.

B. Make sure to check the preview box. Click the Map Art button and click the right arrow button to scroll to the 2nd  surface as you can see below.

Note: The red highlighted surface indicates the current surface you are working on.

C. Select your first symbol from the symbol-selection drop down list and it should be automatically placed in the center.

D. Check the boxes for Shade Artwork and Invisible Geometry.

7. A. Go to the first surface (1/5)  by clicking the left arrow button. Then select your square symbol.

B. Make sure you click Scale to Fit button. You will need to do this for all the surface mapping.

C. Go to surface 3 and insert the square symbol again and click Scale to Fit button again.

D. Map the fourth surface with the square symbol and click Scale to Fit.

E. Map the fifth surface with the second symbol we created and click Scale to Fit.


8. A. Drag the cube around with your right-mousing button. Drag the cube around till you see the holes that go through the surface and to the inside.

This is the end of Part 1. I will conclude with Part 2 where you will create a body, arms, and legs for your Droid avatar.

Resurgence


Sorry for being gone for a while. The reason for my long absence was due to my involvement in a summer enrichment program called Summer Bridge. This program helped familiarize me with the college I’ll be attending, SDSU (San Diego State University). I enjoyed my experiences and accustomed to managing an academic life and a social life. I spent at least 10 hours or more juggling classwork from two classes as well attending activities such kayaking at a beach or explore racial discrimination in a social justice group session. The program lasted for 31 days and feel like a better person from being involved in it. No doubt I will be prepared for when I’ll enter my real college setting on August 29th.

Since I feel bad for missing out on posting tutorials and other things. I’ll post some tutorials/tips this week on.

I fixed the logo up a bit from last time and changed the flier design as well. I’ve also worked on translations for this flier which include Arabic and Spanish translation. Click the flier thumbnail to see the Arabic translation. I’ll also be getting paid for my efforts.

Since typing Arabic in Illustrator gave me such a huge hassle. I’ll post in a tip on how to bring in Arabic text into Illustrator.

iParent 2011Poster and Logo


You may have noticed this bears a very similar design to the Got Plans? poster and this is due to my Got Plans? poster not being chosen as the best design choice. Since I was working on another poster for people that also managed Got Plans?, they wanted me to use the Got Plans? poster design for the iParent. I was working over the summer and met with my clients to discuss further changes to the poster. Thus, I implemented design changes such as the raffle tickets, large text/papers, placement of objects, etc. I was also asked to make a logo if it was possible. So here are the current drafts of the poster and logo.

Experimentation: 3-D Planets


I experimented with this a while ago in May. Basically, it uses the same steps at the Billiard Ball tutorial.

Though not necessarily anything new, I found it useful and worth posting. So, let’s say you want to make a 3-d planet like Earth but don’t know where to start.

Here’s a quick guide.

First, download the earth texture by going here. Then click the picture titled “color map” to download it. Or for simplicity sake, download the 2nd picture I posted.

Then drag this picture into the Symbols window to make a symbol out of it.

Now create a half-circle. Rotate that using Effect>3D>Revolve. Map the sphere by clicking the Map Art button.

Now select the Earth texture from the symbol drop-down menu.

Additionally, you can click the More Options button. Set the surface to Diffuse Shading, the Ambient light to 30%, and the blends steps to 100. Now you should have a 3-d planet similar to mine.

Cork Board Texture Tutorial


This tutorial will guide you on creating a cork board texture using the Effect Gallery.

What You’ll Be Making:



Tools:

  • Illustrator
  • Effect Gallery
  • Texturerizer
  • Crystallize
  • Craquelure

Steps:

1. Create a rectangle/square as big as you want it to be. Change the color to a light brown or RGB: 177, 141, 90 or #B18D5A.

2. A. Select the rectangle then go to Effect>Texture>Texurizer.

B. A window should pop up. For Scaling, enter a value of 170. For the Belief, enter a value of 5. Finally, change the light to Top. Then click OK.

C. It should look like this. See picture below.

3. A. Make sure your object is still selected then go to Effect>Pixelate>Crystallize.

B. A window should pop up. Enter a value of 10 for the Cell Size. Then click OK.

C. It should look like what you see below.


4. A. Make sure your object is still selected then go to Effect>Texture>Craquelure.

B. A window should pop up. Enter 60 for Crack Spacing. Enter 2 for the Crack Depth. Enter 8 for the Crack Brightness. Then click OK.


6. It should finally look this afterwards. Granted I used altered methods for my poster, this one is still usable for your artistic needs and you’re free to alter values if needed.

I hoped you enjoyed this tutorial and learned something new.

Wooden Frame Tutorial Part 2


An optional secondary portion of the Wooden Frame Tutorial that will help you make the edges cleaner.

What You’ll Be Making:



Tools:

  • Illustrator
  • Clipping Masks
  • Effect Gallery
  • Gradients

Steps:

7. A. Select the left portion of the frame. And go to Edit>Copy or Cmd+V/Ctrl+V.

B. Then go to Edit>Paste in Front or Cmd+F/Ctrl+F.


8. A. Open the appearance window if you haven’t already. If lacking it, go to Window> Appearance. Select the object we pasted and go to the Appearance window and select the grain effect and delete it (don’t click on the blue text link).

B. Draw a selection box over the left portions so that you select both the object with the grain effect and the one without. Then right-click>Create Clipping Mask.

C. Now we have a clipping mask on the left portion.

9. A. Double-click the clipping mask to get inside it.

B. Increase the size of the frame portion so the that we can get rid of the unappealing edges. It won’t matter how large we make it since the mask will clip the size we set earlier.


10. The left side should look like this now.

11. Repeat the process for the other three portions and it should look like this in the end.

I hoped you enjoyed this tutorial and learned something new. An optional part 2 comes after this but feel free to skip it if you want.

Wooden Frame Tutorial Part 1


A some-what advanced tutorial that will guide you on how to make a wooden frame vector in Illustrator. The next tutorial after this will be about making the cork-board texture.

What You’ll Be Making:



Tools:

  • Illustrator
  • Clipping Masks
  • Effect Gallery
  • Gradients

Steps:

1. A. Create a rectangle as big as you and give it a fill so you can see it.

B. Select it and go to Object>Path>Offset Path.

C. An options window should pop up. Enter a negative value so the object’s offset can go inward. Click the Up/Down Arrow Key to see what suits you. Then click OK. Change its color so you can notice it.

D. Draw some straight segments from the corners of the big rectangle to the corners of the smaller rectangle.

2. A. Have the pathfinder window open. If it’s not open go to Window>Pathfinder. Select both rectangles and the segments and click the Divide button in the Pathfinder window. The Divide button is in the bottom-left corner.

B. The pathfinder will divide all your selected shapes into smaller portions.

C. Select the inner rectangle with the White Arrow Tool and delete it.

D. Also make sure to ungroup the portions so that you can select one part without selecting the other.

3. A. Select the top and bottom portion and add the default linear gradient.

B. Enter -90° for the angle so that the gradient is vertical.

C. Inside the gradient window, double-click the white box and change the color to #B8996F or RGB: 184, 153, 11 or a light brown color. Change the black color to #806C4F or RGB: 128, 108, 79 or a dark brown color.

D. Add another linear gradient to the left portion. Adjust the color of the light-brown color to #C1A175 or RGB193, 161, 117. 

E. Add the same gradient to the right portion but reverse the gradient. The reverse button is the one to the left of the angle box.


4. A. Select the left portion again and go to Effect>Effect Gallery.

B. A window should pop up and should look like what you see below.

C. Locate the grain effect which is in the texture folder like you see below.

D. Change the grain type to Vertical.

E. Change the Intensity to 12 and the Contrast to 20. Then click OK.


5. A. To save time, select the right portion and go to Effect>Grain which will be at the top of the drop-down menu since you’ve used it previously.

B. Make sure the values are the same as last time.

C. Select the top portion and go to Effect>Grain.

D. The only thing to change this time is setting the grain type to Horizontal.

E. Select the bottom portion and go to Effect>Grain.

F. Set the grain type to horizontal again if needed.


6. A. Now you know how to make your own wooden frame. Though, as you can see, there are unappealing white edges on all the frame parts. If you would like to know how to hide them, go to the next part of the tutorial.

I hoped you enjoyed this tutorial and learned something new. An optional part 2 comes after this but feel free to skip it if you want.

Gradual Change


With the events after the art show, I had ran out of things to work on. With day after day, I decided to help some students with tutorials they follow such as mine or others. Luck would have it, no one has worked on an iParent poster and that the competition for Got Plans was still open. With those two in mind, I decided to put some effort in these last days of high school.

This is the final efforts on my Got Plans? poster. I will have an exuberant amount of time for the iParent poster, which is what my current focus is as of now.

I will make a tutorial on how to create a cork-board effect in Illustrator.

District Art Show


I finished and submitted this piece to the art show. Hopefully I can win another prize like the last one from 2008.

%d bloggers like this: